| Peer-Reviewed

An Analysis of Power Supply Design in Networking Systems on the Practices of Supply Chain Management

Received: 6 October 2014     Accepted: 16 October 2014     Published: 11 December 2014
Views:       Downloads:
Abstract

Now-a-days power supply and its networking system play a first and foremost role in every aspects of human life as well as organizational life. This invited article analyzes about “An offline, three-output, 150-W forward converter is used as an example to illustrate the design process for typical isolated converters. This example emphasizes the basics with a double-ended forward topology using coupled inductors for output accuracy. Design issues and trade-off decisions to optimize power efficiency while keeping costs to a minimum are highlighted. Finally, the presentation of measured performance results confirms the design process." Electrical power is the rate of movement of electrons that create energy. As a result of the electronic age many products need electrical power to perform certain activities. Being able to manipulate electrical power comes at a cost. In today's world there is always the bottom line, cost Power supplies are the devices that can manipulate electrical power to be used in various applications. Power supplies can be expensive but there are cheaper alternative solutions that can produce the same output. A power supply includes conversion steps and has to be reliable enough not to damage what it is hooked up to. Both aspects need specific parts in a certain orientations to create those specific outputs. Throughout this note there where is much suggestion on how to create a cheap reliable power supply.

Published in International Journal of Business and Economics Research (Volume 3, Issue 6-1)

This article belongs to the Special Issue Supply Chain Management: Its Theory and Applications

DOI 10.11648/j.ijber.s.2014030601.22
Page(s) 81-86
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Power Supply Design (PSD) Net-Working System (NS) Supply-Chain Management (SCM), Design Process (DP), Typical Isolated Converter (TIC), Cheap -Reliable Power -Supply (CRPS), TP-Topology

References
[1] Nar Simhan, R. “An analytic approach to supplier, Selection, J.Purch. Supply Management, 1983, 1, 27, 32.
[2] “Dc Power Supply.” Test Equity. 2 Apr.2009 .
[3] “Linear regulator.” Wikipedia. Feb. 2009. 2 Apr. 2009 .
[4] “LM317 - 3-Terminal Adjustable Regulator.” National Semiconductor. Apr. 2009. 2 Apr. 2009 .
[5] “TESLA: Life and Legacy.” PBS. TESSCO. 1 Apr. 2009 .
[6] Wierzba, Gregory. “Diode Characteristic and Circuits.” ECE-302. EGR Building. Mar. 2007.
[7] Walker, Ed, Design Review: A Step-By-Step Approach to AC Line-Powered Converters, Texas Instruments 2004/05 Power Supply Design Seminar, SEM1600, pp. 3-1 to 3-25. 25 pages.
[8] A text book of Network Theory by P.K Satapathy, Chakrabathy of Sultan& Chand co publishers, New Delhi.2001,
[9] ”Supply Chain Management: Concept and Cases” by Rahul .V. Alteker (p-4) Prentice Hull -2005,
[10] Research manual of power plant of NTPC India Ltd., kanhia, Talcher Anugul Odisha
Cite This Article
  • APA Style

    Ramesh Chandra Rath, Nihar Ranjan Hota, Himanshu Shekhar Maharana, Sunil Kumar Patel. (2014). An Analysis of Power Supply Design in Networking Systems on the Practices of Supply Chain Management. International Journal of Business and Economics Research, 3(6-1), 81-86. https://doi.org/10.11648/j.ijber.s.2014030601.22

    Copy | Download

    ACS Style

    Ramesh Chandra Rath; Nihar Ranjan Hota; Himanshu Shekhar Maharana; Sunil Kumar Patel. An Analysis of Power Supply Design in Networking Systems on the Practices of Supply Chain Management. Int. J. Bus. Econ. Res. 2014, 3(6-1), 81-86. doi: 10.11648/j.ijber.s.2014030601.22

    Copy | Download

    AMA Style

    Ramesh Chandra Rath, Nihar Ranjan Hota, Himanshu Shekhar Maharana, Sunil Kumar Patel. An Analysis of Power Supply Design in Networking Systems on the Practices of Supply Chain Management. Int J Bus Econ Res. 2014;3(6-1):81-86. doi: 10.11648/j.ijber.s.2014030601.22

    Copy | Download

  • @article{10.11648/j.ijber.s.2014030601.22,
      author = {Ramesh Chandra Rath and Nihar Ranjan Hota and Himanshu Shekhar Maharana and Sunil Kumar Patel},
      title = {An Analysis of Power Supply Design in Networking Systems on the Practices of Supply Chain Management},
      journal = {International Journal of Business and Economics Research},
      volume = {3},
      number = {6-1},
      pages = {81-86},
      doi = {10.11648/j.ijber.s.2014030601.22},
      url = {https://doi.org/10.11648/j.ijber.s.2014030601.22},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijber.s.2014030601.22},
      abstract = {Now-a-days power supply and its networking system play a first and foremost role in every aspects of human life as well as organizational life. This invited article analyzes about “An offline, three-output, 150-W forward converter is used as an example to illustrate the design process for typical isolated converters. This example emphasizes the basics with a double-ended forward topology using coupled inductors for output accuracy. Design issues and trade-off decisions to optimize power efficiency while keeping costs to a minimum are highlighted. Finally, the presentation of measured performance results confirms the design process." Electrical power is the rate of movement of electrons that create energy. As a result of the electronic age many products need electrical power to perform certain activities. Being able to manipulate electrical power comes at a cost. In today's world there is always the bottom line, cost Power supplies are the devices that can manipulate electrical power to be used in various applications. Power supplies can be expensive but there are cheaper alternative solutions that can produce the same output. A power supply includes conversion steps and has to be reliable enough not to damage what it is hooked up to. Both aspects need specific parts in a certain orientations to create those specific outputs. Throughout this note there where is much suggestion on how to create a cheap reliable power supply.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - An Analysis of Power Supply Design in Networking Systems on the Practices of Supply Chain Management
    AU  - Ramesh Chandra Rath
    AU  - Nihar Ranjan Hota
    AU  - Himanshu Shekhar Maharana
    AU  - Sunil Kumar Patel
    Y1  - 2014/12/11
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijber.s.2014030601.22
    DO  - 10.11648/j.ijber.s.2014030601.22
    T2  - International Journal of Business and Economics Research
    JF  - International Journal of Business and Economics Research
    JO  - International Journal of Business and Economics Research
    SP  - 81
    EP  - 86
    PB  - Science Publishing Group
    SN  - 2328-756X
    UR  - https://doi.org/10.11648/j.ijber.s.2014030601.22
    AB  - Now-a-days power supply and its networking system play a first and foremost role in every aspects of human life as well as organizational life. This invited article analyzes about “An offline, three-output, 150-W forward converter is used as an example to illustrate the design process for typical isolated converters. This example emphasizes the basics with a double-ended forward topology using coupled inductors for output accuracy. Design issues and trade-off decisions to optimize power efficiency while keeping costs to a minimum are highlighted. Finally, the presentation of measured performance results confirms the design process." Electrical power is the rate of movement of electrons that create energy. As a result of the electronic age many products need electrical power to perform certain activities. Being able to manipulate electrical power comes at a cost. In today's world there is always the bottom line, cost Power supplies are the devices that can manipulate electrical power to be used in various applications. Power supplies can be expensive but there are cheaper alternative solutions that can produce the same output. A power supply includes conversion steps and has to be reliable enough not to damage what it is hooked up to. Both aspects need specific parts in a certain orientations to create those specific outputs. Throughout this note there where is much suggestion on how to create a cheap reliable power supply.
    VL  - 3
    IS  - 6-1
    ER  - 

    Copy | Download

Author Information
  • Professor in Management Dept. of Basic Sci. & Humanities, Einstein Academy of Technology & Management (EATM), Bhubaneswar (India), Approved by AICTE & Affiliated to Biju Patnaik University and Technology (BPUT) Rourkela, Odisha (India)

  • Assistant Professor, Department of Computer Science &Engineering, Einstein Academy of Technology & Management (EATM), Bhubaneswar (India), Approved by AICTE & Affiliated to Biju Patnaik University and Technology (BPUT) Rourkela, Odisha (India)

  • Assistant Professor, Department of Electrical Engineering, Einstein Academy of Technology & Management (EATM), Bhubaneswar (India), Approved by AICTE & Affiliated to Biju Patnaik University and Technology (BPUT) Rourkela, Odisha (India)

  • Assistant Professor in Dept.of Computer Science Engineering, Einstein Academy of Technology & Management (EATM), Bhubaneswar (India), Approved by AICTE & Affiliated to Biju Patnaik University and Technology (BPUT) Rourkela, Odisha (India)

  • Sections