| Peer-Reviewed

Wall Flows and their Applications

Received: 9 September 2014     Accepted: 12 September 2014     Published: 17 October 2014
Views:       Downloads:
Abstract

So-called wall flows are usable in many technical applications as a simple and reliable device for exhausting of light materials as dust, smoke, hot air, etc. In another cases, such flows can make troubles by treatment of light materials as fibers, etc. and it is necessary to suppress the wall effects by suitable design adjustments. But there is described a useful effect of wall flows on quality of fibrous product, too.

Published in International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-1)

This article belongs to the Special Issue Numerical Flow Simulations in Textile Industry

DOI 10.11648/j.ijmea.s.2015030101.15
Page(s) 28-32
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Numerical Flow Simulation, Wall Effect, Wall Flow

References
[1] J. Pelant, K. Adamek, "Flow around moving surface", ECCOMAS (Europ. Congress on Comput. Meth. in Appl, Sciences and Engineering), University of Jyvaskyla, Finland, 2004. ISBN ….
[2] J. Pelant, K. Adamek, "Luftstroemung entlang des rotierenden Kardenbelags", Chemnitzer Textilmachinen-Tagung, TU Chemnitz, BRD, 2003. ISBN …
[3] K. Adamek, J. Pelant, "Velocity field around rotating surfaces, "XXIInd. int. conf. of departments of thermomech. and fluid mech., Doubice, 2003, ISBN 80-8073-710-1 (in Czech).
[4] K. Adamek, J. Kolar, "Influence of the induced airflow on calendering", EFM11 (Experimental Fluid Mechanics). TU Liberec, JiCin, 2011. ISBN 978-80-7372-784-0.
[5] K. Adamek, "Einfluss der induzierten Luftstroemung beim Kalandrieren", Chemnitzer Textiltechnik Tagung, TU Chemnitz, 2011, ISBN 978-3-9812554-7-8.
[6] K. Adamek, J. Kolar, "Numerical flow simulations used in industrial problems", ECCOMAS (Europ. Congress on Comput. Meth. in Appl. Sciences and Engineering). TU Wien, Austria, 2012, ISBN 978-3-9502481-9-7.
[7] K. Adamek, J. Kolar, "Induced airflow around the calendering drums", Int. Journal of. Mechan. Eng. and Applic. Science PG, 2013, ISSN 2330-0248, ISSN 2330-023x.
[8] K. Adamek, J. Zak, P. Kavan, P. Sidlof, J. Kolar, "Contactless pressing of a sheet", EFM13 (Experimental Fluid Mechanics), TU Liberec, Kutna Hora, 2013, ISBN 978-80-260-5375-0.
[9] J. Bukovsky, "Wall effect applications" Int. conf. Applic. of exp. meth. in fluid. mech., VSDS Zilina, 1984 (in Czech).
[10] K. Adamek, "Automatic weft repair", report VUTS Liberec, 1996, applied on air jet looms Camel, Vega etc. VUTS Liberec, 2000.
[11] Utility design No. CZ - 2012-25916: Zarizeni pro upravu netkane textilie (Device for treating of nonwoven layer), 25.06.2012.
[12] Utility design No. DE202012012256: Einrichtung zur Behandlung eines Vliesstoffs, 2013-02-27.
Cite This Article
  • APA Style

    Karel Adamek, Dusan Cejka, Zdeněk Mecl, Jaroslav Pelant. (2014). Wall Flows and their Applications. International Journal of Mechanical Engineering and Applications, 3(1-1), 28-32. https://doi.org/10.11648/j.ijmea.s.2015030101.15

    Copy | Download

    ACS Style

    Karel Adamek; Dusan Cejka; Zdeněk Mecl; Jaroslav Pelant. Wall Flows and their Applications. Int. J. Mech. Eng. Appl. 2014, 3(1-1), 28-32. doi: 10.11648/j.ijmea.s.2015030101.15

    Copy | Download

    AMA Style

    Karel Adamek, Dusan Cejka, Zdeněk Mecl, Jaroslav Pelant. Wall Flows and their Applications. Int J Mech Eng Appl. 2014;3(1-1):28-32. doi: 10.11648/j.ijmea.s.2015030101.15

    Copy | Download

  • @article{10.11648/j.ijmea.s.2015030101.15,
      author = {Karel Adamek and Dusan Cejka and Zdeněk Mecl and Jaroslav Pelant},
      title = {Wall Flows and their Applications},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {3},
      number = {1-1},
      pages = {28-32},
      doi = {10.11648/j.ijmea.s.2015030101.15},
      url = {https://doi.org/10.11648/j.ijmea.s.2015030101.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.s.2015030101.15},
      abstract = {So-called wall flows are usable in many technical applications as a simple and reliable device for exhausting of light materials as dust, smoke, hot air, etc. In another cases, such flows can make troubles by treatment of light materials as fibers, etc. and it is necessary to suppress the wall effects by suitable design adjustments. But there is described a useful effect of wall flows on quality of fibrous product, too.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Wall Flows and their Applications
    AU  - Karel Adamek
    AU  - Dusan Cejka
    AU  - Zdeněk Mecl
    AU  - Jaroslav Pelant
    Y1  - 2014/10/17
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ijmea.s.2015030101.15
    DO  - 10.11648/j.ijmea.s.2015030101.15
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 28
    EP  - 32
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.s.2015030101.15
    AB  - So-called wall flows are usable in many technical applications as a simple and reliable device for exhausting of light materials as dust, smoke, hot air, etc. In another cases, such flows can make troubles by treatment of light materials as fibers, etc. and it is necessary to suppress the wall effects by suitable design adjustments. But there is described a useful effect of wall flows on quality of fibrous product, too.
    VL  - 3
    IS  - 1-1
    ER  - 

    Copy | Download

Author Information
  • VUTS – Centre of Machinery Research, Liberec, Czech Rep.

  • KBA- Grafitec, Dobruska, Czech Rep.

  • PEGAS Nonwovens, Znojmo, Czech Rep.

  • VZLU – Aeronautical Research and Testing Institute, Praha, Czech Rep.

  • Sections